5 Creative Ways You Can Improve Your Jaw Crusher

1. Perform regular machine maintenance. During the use of the jaw crusher, the screws of the internal parts of jaw crusher or the screws fixing jaw crusher often become loose due to the huge force of jaw crusher, which requires regular strengthening of jaw crusher's screws.

2. Ensure proper machine internal temperature. Jaw crusher will generate a lot of heat due to friction during use. If this heat cannot be dissipated and accumulated in jaw crusher in time, it will damage jaw crusher. For example, the center axis of jaw crusher will be deformed due to the high temperature, and it will be damaged when the stone is broken. Therefore, when using the crusher, you must pay attention to the internal temperature at any time. If the temperature of jaw crusher is too high, stop working in time and use it when the temperature decreases.

3. Change the lubricant to jaw crusher in time. After jaw crusher is used for a period of time, the internal lubricant will reduce the lubricating effect. Debris deposited during the operation of jaw crusher will also increase the wear of jaw crusher. Therefore, when the lubricant is used for a period of time, it should be replaced in time. And after replacement, use kerosene to thoroughly clean the inside, so that no debris is left. In this way, jaw crusher is not easy to wear.

4. Pick out the iron nuggets when adding the ingredients. If the iron block is in the raw material, it will damage the jaws of the Jinan Hubei crushed stone equipment, making jaw crusher unusable.

5. Add the ingredients evenly. In this way, jaw crusher will not be damaged due to excessive load after too much raw material enters jaw crusher.